Type of connectors RG, RG-P :: Public Joint Stock Company "Connector"

Русский | English

Rectangular electrical connector

Cylindrical electrical connector

Tools

F.A.Q.

HELPFUL INFORMATION And REFERENCES

FOR CLIENTS AND PARTNERS

Type of connectors RG, RG-P

Application

They are used in radio electronic and radio engineering equipment as connectors of the general typeThey are used in radio electronic and radio engineering equipment as connectors of the general type. They are mated with respective cable portions of connectors of the type R as specified in

Standarts

OST-V 11 0121-91
GE0.364.113 Specification
bRO.364.041 Specification

Design description

- screw mating
- air tight (with pressure drop to 9,8õ104 Pa (1 kgf/sm2) air leakage
- should not exceed 2 l/h)
- climatic version UHL
- contacts plating: silver
- mounting method: soldering

Characteristics

Mechanical
vibration:	frequency range, Hz - 1…5000 acceleration, m/s2 - 300 (30g)
single impacts:	acceleration, m/s2 - 5000 (500g)
multiple impacts:	acceleration, m/s2 - 350 (35g)
linear loads:	acceleration, m/s2 - 2000 (200g)

Reliability requirements
minimum operating time, h	10000
with mate-unmate operations	500
minimum storage life, years	15

Electric
maximum operating voltage, not more than	2100V
operating current across the contact, not more than	ref. contact location diagrams
resistance of electric contact, not more than, mOhm	for connectors RG - 2,5 for connectors RG-P - 3,5
insulation resistance in normal climatic conditions, not less than	5000 MOhm

Climatic
ambient air temperature, °С	from minus 60°C - to plus 85°C
change of temperature, °С	from minus 60 °C- to plus 115°C (taking in the account the temperature of contacts overheat)
atmospheric pressure decrease, operating Pa (mm.Hg)	1,3 10-4 (10)

Designation

	RG	20	PK	4	EA	SH	4
Type
Dimension type
Design version: Fixed connector P - without branch pipe PK - with straight branch pipe SK - with angled branch pipe PKP - adapter
Number of contacts (ref. contact location diagrams)
Type of the branch pipe EA - for shielded (ref. note 1) N - for non-shielded cable
Type of contacts: Fixed connector SH - plug (male connector) Adapter: SH - plug (male connector)
Combination of contacts (ref. contact location diagrams)
Application In fixed connector without branch pipe and adapter, there is no nut for fixing the cable. Designation "EA" - conventional. Designation while placing the order: Plug RG20PK4EASH4 GE0.364.113 Specification Adapter RG20PKP4EASH4 GE0.364.113 Specification