Type of connectors RPKM1—RPKM4 :: Public Joint Stock Company "Connector"

Русский | English

Rectangular electrical connector

Cylindrical electrical connector

Tools

F.A.Q.

HELPFUL INFORMATION And REFERENCES

FOR CLIENTS AND PARTNERS

Type of connectors RPKM1—RPKM4

Application

Application they are used in radio electronic and radio engineering equipment as connectors of the general type

Standarts

OST V 11 0121-91
AVO.364.040 Specification

Design description

- cut in type
- combination type: radio frequency (RCH) and low frequency (NCH) contacts
- climatic version V
- coding element
- contacts plating: gold, silver
- mounting method: soldering
- dust-spray proof at the housings joints

Characteristics

Mechanical
vibration:	frequency range, Hz - 5…2500 acceleration, m/s2 - 150 (15g)
single impact:	acceleration, m/s2 - 5000 (500g)
multiple impacts:	acceleration, m/s2 - 750 (75g)
linear loads:	acceleration, m/s2 - 1500 (150g)

Reliability requirements
guaranty operating time, h	5000
with mate-unmate operations	500
storage life	20 years

Electric
maximum operation direct current voltage	ref. contact location diagrams
operating current across contact	ref. contact location diagrams
electric contact resistance, not more than, mOhm	Õ 1,0 - 5 Õ 1,5 - 2,5 RCH - 10
insulation resistance in normal climatic conditions, not less than	low frequency connectors - 5000 MOhm radio frequency connectors - 1000 МОhm
insulation resistance is not less than,	low frequency portions of connector -1000 mOhm radio frequency portions of connector - 5000 mOhm

Climatic requirements
ambient air temperature, °С	from minus 60 - to plus 100°С
temperature change, °С	from minus 60 - to plus 120°С (taking in the account the temperature of contacts overheat)
decrease of atmospheric pressure operating, Pa (mm.Hg)	1,3х10-4 (1х10-6)

Designation

	RPKM	-67/32	SH	1	-0/1	-V
Type 1 - single row connector with silver plated contact 2 - single row connector with gold plated contact 3 - double row connector with silver plated contact 4 - double row connector with gold plated contact
Number of contacts (ref. note 1)
Type of contact: SH - plug (male connector) G - socket (female connector)
Design version: Plug: 1 - without backshell Socket: 1 - without backshell, housing has the holes for fixing backshell 3 - without backshell, housing does not have the holes for fixing backshell 4 - with backshell ( is not manufactured)
Additional numeric designation of the radio frequency contact (ref. note 2)
Universal climatic version
Notes 1. Number of contacts connectors RPKM1, RPKM2 is designated by integral number. Number of contacts of connectors RPKM3, RPKM4 (double row connectors) is designated by fractional number, the numerator of which shows the number of contacts in the upper contact location diagram (where there is inscription “Top” on the housing), while denominator shows the number of contacts in the lower contacts location diagram. If one of the contacts location diagram in the double row connectors is missing the letter “S” is used instead of it (RPKM3S/67SH1V). 2. The number of the radio frequency contacts is indicated for the contacts location diagrams, in which the radio frequency contacts are envisaged. If one of the contacts location diagrams of the double row connector does not include the radio frequency contacts the “O” is used (RPKM367/32SH10/1V). If one of the contacts location diagrams of the double row connector is missing instead of it in numerical designation of the radio frequency contacts the letter “S” is used (RPKM3S/32G1S/1V).Пример обозначения при заказе: Designation while placing the order: Plug RPKM4-67/32SH1-0/1-V AVO.364.040 Specification Socket RPKM3-32/32G1-1/1-V AVO.364.040 Specification