Русский   |   English
Home page Contacts Site map
Public Joint Stock Company «Connector» Public Joint Stock Company «Connector» - the major CIS manufacturer of electric connectors
 

Type of connectors SNO 48

Cоединители типа СНО 48

Field of application

Application they are used in radio electronic and radio engineering equipment as the connectors of the general type

Standarts

OST V 11 0121-91
DJEA0.364.012 Specification

Design description

- screw mating
- climatic version UHL
- contact plating: silver
- mounting method: soldering

Characteristics

   

Mechanical

vibration:
frequency range, Hz - 1…2000
acceleration, m/s2 - 300 (30g)
single impacts:
acceleration, m/s2 - 10000 (1000g)
multiple impacts: acceleration, m/s2 -1500 (150g)
linear load: acceleration, m/s2 - 1000 (100g)
   

Reliability requirements

minimum operating time, h 10000
with the mate-unmate operations 500
minimum storage life, years 25
   

Electric

operating voltage, (amplitude value) 350 V
operating current across the contact, not more than 1,5 А
resistance of electric contact, not more than 10 mOhm
сопротивление изоляции в нормальных климатических условиях, не менее 5000 МОм
   

Climatic

ambient air temperature, °С from minus 60 - to plus 85°С
temperature change , °С from minus 60 - to plus 115°С (taking into account contacts overheat temperature)
atmospheric pressure decrease, operating Pa (mm.Hg) 0,65х103 (5)

Designation

  SNO48 -108 /62х40 V -6 М -V
Connector type            
Number of contacts
Conventional dimension of plug (socket)
(55х40; 62х40; 82х40)
Type of contacts:
V - plug (male connector)
R - socket (female connector)
Design version:
6 - fixed portion without backshell
8 - fixed portion with angled backshell
10 - cable portion with straight backshell
11 - cable portion with angled backshell
Additional designation - only for connectors (plugs, sockets) with variator insert without slotted teeth.
Universal climatic version

Note:

Designation of plugs (sockets) in design documents of the other products includes the version number, which determines variator position as specified in DJEA0.364.012Specification. Version number is determined and marked by the user after installation of the variator. Пример обозначения при заказе

Plug SNO48-108/62х40V-6M-V DJEA0.364.012 Specification
Socket SNO48-108/82х40R-11-V DJEA0.364.012 Specification

 
 
 
© 2007 Public Joint Stock Company "Connector"
 
Development by sdesign.com.ua Site design Limited Liability Company "S-Design"
prospect. Gagarina, 98, Kharkov, 61140
mail@connector.com.ua
Contacts